(Clearance)Rode Stereo VideoMic Pro Rycote

(Clearance)Rode Stereo VideoMic Pro Rycote
Regular price 1,079.00 Sale price 959.00


The Stereo VideoMic Pro Rycote from Rode builds on the success of the Stereo VideoMic Pro with a few improved upgrades such as a Rycote Lyre shockmount, higher-sensitivity X/Y capsules, denser foam windscreen, better RF shielding, and a thicker Kevlar braided cable. The microphone retains all of the switch locations and other features as the previous model, for use as an on-camera DSLR and camcorder microphone for video applications.

The integrated Rycote Lyre shockmount system protects against handling noise. The Stereo VideoMic features a high-pass filter switch at 75 Hz for minimizing low-frequency noise, and a -10 dB pad for maximizing headroom on behalf of capturing loud signals without distortion. The +20 dB level-boost switch is specifically designed to provide a higher-quality signal with DSLR cameras. When activated, the camera preamp level is reduced, resulting in a lower noise floor and a much clearer recording.

  • Broadcast-recording-quality on-camera microphone
  • Matched pair, 1/2" condenser capsules in X/Y stereo configuration
  • Ultra-lightweight, compact form factor
  • Two-step high-pass filter (flat, 75 Hz)
  • Three-position level control (-10, 0, +20 dB)
  • 9V-battery-powered - over 100 hours of use (alkaline)
  • Integrated Rycote Lyre shockmount
  • Denser foam windscreen
  • 1/8" (3.5mm) stereo mini-jack output
  • Billeted metal camera shoe mount with 3/8" thread for easy boompole mounting
Technical Specs


Pressure gradient

Polar Pattern

XY Cardioid

Frequency Range

40 Hz to 20 kHz (selectable HPF @ 75 Hz)


-38 dB (12.6 mV @ 94 dB SPL) ±2 dB re 1 V/Pa @ 1 kHz

Output Impedance

200 Ohms

Maximum Output

+4.2 dBu (@ 1% THD into 1 kOhms)

Dynamic Range

100 dB

Maximum SPL

134 dB, max (1 kHz, 1% THD into 1 kOhms load)

Signal / Noise

76 dBA (A-weighted per IED651)

Power Supply

9 V alkaline battery


1/8" (3.5 mm) stereo mini-jack

Signal to Noise Ratio

76 dBA SPL (A-weighted per IEC651)

Dimensions (D x W x H)

4.5 x 3.1 x 5.3" (115 x 80 x 134 mm)


0.26 lb (116 g) (without battery)