Benro TSL08AN00 Slim Aluminum-Alloy Tripod with Ball Head

Benro TSL08AN00 Slim Aluminum-Alloy Tripod with Ball Head
Regular price 295.00

Description

This TSL08AN00 Slim Aluminum-Alloy Tripod from Benro supports up to 8.8 lb and includes an Arca-type ball head with quick release plate. Designed to conserve space during storage and transport, the tripod measures 20.1" long and 3.2" wide when folded. Its 4-section legs each feature an independent spread, a 3-position angle lock, half-turn twist locks for rapid deployment, and a rubber foot to enhance stability on a wide variety of surfaces. Together, the three legs can be extended and spread to raise the tripod from a minimum height of 15.7" to a maximum height of 48.4" or 57.6" with its push-and-pull, rapid center column fully raised.

Cameras, lenses, or sport optics that are compatible with a 1/4"-20 mount can be connected to the included quick release plate. The quick release plate can be attached or removed from the integrated, Arca-type clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. While the top of the quick release plate features a rubberized, non-slip platform, dual retaining screws are provided along its underside. Those retaining screws help prevent the quick release plate and an attached camera from accidentally sliding off when the clamp it is placed on is opened.

By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Additionally, the primary locking knob controls the ability to pan the head 360°. For added versatility, the tripod's center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them.

A nylon, drawstring bag is provided for storage and transport.

 Details

-Use and Handling

Supports up to 8.8 lb

Push-and-pull center column with ballast hook for rapid camera, lens, or sport optic positioning

Can be set for a minimum height of 15.7" to a maximum height of 48.4", or 57.6" with center column fully raised

Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them

Legs each feature 4 sections, a 3-position angle lock, half-turn twist locks for rapid deployment, and can be independently spread

Legs can be locked at 21°, 55°, or 80° angles

Rubber feet help to enhance stability on a wide variety of surfaces

Built-in bubble level

Weighs 2.6 lb, measures 20.1" long and 3.2" wide when folded

Hex key to adjust tension on leg hinges

-Construction Details

Aluminum-alloy legs

Magnesium-alloy ball head with Arca-type quick release clamp

Aluminum-alloy quick release plate with 1/4"-20 mount; rubberized, anti-slip surface; and dual retaining screws that prevent the base plate from accidentally sliding off when the clamp it is placed on is opened

Drawstring bag for storage and transport

 Technical Specs

Head

Head Type

Ball Head

Base Mount

3/8"-16 Thread

Camera Mounting Screw

1/4"-20 Male

Quick Release Plate Type

Arca-Type

General

Load Capacity

8.8 lb / 4 kg

Maximum Working Height

57.6" / 146.3 cm

Max Height without Center Column

48.4" / 122.9 cm

Minimum Working Height

15.7" / 39.9 cm

Materials

Aluminum Alloy

Weight

2.6 lb / 1.2 kg

Legs

Leg Lock Type

Twist Lock

Leg Positions

3 Positions

Independent Leg Spread

Yes

Leg Sections

4

Bubble Level

Yes

Center Column

Center Column Features

Ballast Hook, Reversible

Center Column Sections

1

Center Column Extension Type

Rapid

Lateral / 90-Degree Center Column

No

 

Login